οδηγίες χρήσης SANUS SF208

[. . . ] These operating instructions must be constantly kept available close to the appliance. They are to be read and applied by everyone assigned to operate, and eliminate faults in, the appliance. Retain these operating instructions and pass them on, together with the appliance, to any future owners. Copyright This documentation is copyright protected. Any copying or reproduction of it, including as extracts, as well as the reproduction of images, also in an altered state, is only permitted with the written authorisation of the manufacturer. Limited liability All technical information, data and instructions for the installation, connection and operation contained in these operating instructions correspond to the latest available at the time of printing and, to the best of our knowledge, take into account our previous experience and know-how. [. . . ] 6) After everything has been correctly assembled, screw the ring clamp 0 back on hand-tight. SF208 7 GB IE CY 7) Replace the pattern strips 1 back in to the front of the biscuit attachment 1. Ensure that the grip on the pattern strips 1 points away from the appliance. If it does not, you will not be able to adjust the pattern, which is located directly on the grip. 8) Assemble the meat grinder casing 5 as described under "Assembling the meat grinder". 9) To dismantle it, you must first remove the pattern strips 1 before you can screw the ring clamp 0 open and take the biscuit attachment 1 back out. Operation RISK OF ELECTRIC SHOCK NEVER open the housing of the motor block 4 ­ it does not contain any user-serviceable elements. If the housing is opened, the warranty becomes void. If the housing is opened, there is a risk of receiving a potentially fatal electric shock. Do not use the appliance for longer than 15 minutes continuously. To avoid an overheating of the appliance, after such a period switch it off and allow it to cool down for ca. NEVER activate the buttons "I" or "<", during a change of rotation direction, if the appliance motor has not come to a complete stop. 2) To make sausage stuffing, add some chopped onions, spices and other ingredients to the minced meat, as per your recipe, and knead the mixture well. If you do not succeed in getting the drive free with this, clean the appliance as described in the chapter "Cleaning". GB IE CY Should the motor suddenly stop, it could be due to automatic activation of the internal overload fuse. This is intended to protect the motor. Switch the appliance off and allow it cool down for approximately 30 minutes before continuing to use it. Should this not work, wait for a further 15 minutes. If it still does not function at the end of this period, this indicates a technical problem. In this case, contact the Customer Service Centre. If the power cable is damaged or the accessories are visibly damaged: Immediately switch the appliance off by pressing the "0" button! If this is not possible without risk to personal safety, disconnect the plug from the mains power socket. Arrange for the defective parts to be repaired by Customer Services before re-using the appliance. Cleaning RISK OF ELECTRIC SHOCK Disconnect the plug from the mains power socket before cleaning the appliance. In this way accidents caused by the inadvertent switching on of the appliance and electric shocks can be avoided. Cleaning the motor block Clean the exterior surfaces and the power cable with a slighly damp cloth. Dry the appliance well before re-using it. SF208 11 GB IE CY RISK OF ELECTRIC SHOCK Never immerse the motor block in water or any other liquid!Should this occur, you are at risk of a potentially fatal electric shock if permeating moisture makes contact with the electrical wiring. Never use detergents, abrasive cleaners or solvents. [. . . ] . 18 SF208 . 220 - 240 V , 50 Hz 250 W II / 15 GR CY 1 2 3 4 5 6 7 8 9 0 q w e Kubbe SF208 19 GR CY . ( ) , / , . . GR CY - . [. . . ]